PLA Strong Filament - Pistachiogreen


PLA is the most popular raw material for 3D printing because it is easy to process and almost odourless.
It is suitable for home, school, laboratory and commercial applications.
TWINS MFG 3D printer filaments are manufactured under strict control to ensure quality.

Excellent clarity, light transmission and high gloss. High toughness. Excellent impact resistance. Chemical resistance. Good stability. No cracking. No warping. Environmentally friendly. Non-toxic and low odour.

Perfect roundness and very tight diameter tolerance to ensure consistent feeding and stable prints, extremely high success rate, achieve a wonderful printing experience.


Physical Properties      Method               Value
Intensity                           D1505                  1.24 g/cc
Tensile strength              D882                   21 kpsi


Dimensions : 0.25 kg, 0.5 kg or 1 kg / roll

Dimensions for 0.5 Kg Spool
Filament Diameter   = 1.75 mm
Filament Length = 165 m

Dimensions for 1 Kg Spool
Filament Diameter =1.75 mm
Filament Length = 330 m

Ingeo™ Biopolymer 2003D Technical Data Sheet

Additional information

Technical specifications

• Diameter: 1.75 mm (Tolerance +- %5)
• Weight: 0.25 kg, 0.5 kg or 1 kg / roll
• Diameter tolerance: ± 3%
• It is packed in a vacuum bag with silica gel to prevent moisture absorption.
• Recommended printing temperature: 190-220 ° C (374-428 ° F.)
• Recommended compartment temperature: 0 to 65 ° C (0 to 149 ° F)
• Roll diameter: 19.5 cm
• Roll width: 7.5 cm
• Roll core diameter: 5.5 cm

Note: Values may vary depending on printer type, environmental conditions, and filament color.During printing, temperatures can be changed up to ±5 °C until ideal flow and table adhesion are achieved.

Storage conditions:

• Between 18 and 27 °C [65 to 80 °F], protect from sunlight and moisture.
• Store in a dry place.
• It is recommended to keep it hermetically sealed.